This is the code for the Arduino and CC1101 radio module receiver example for 1 byte data. You will need the ELECHOUSE_CC1101 library so download it from below and install it. Read all comments in the code in order to understand more. Downlaod the code from the link below or just copy the code from below as well.
/* 1byte CC1101 Receiver example.
/* Tutorial link: http://electronoobs.com/eng_arduino_tut98.php
* Code: http://electronoobs.com/eng_arduino_tut98_code2.php
* Scheamtic: http://electronoobs.com/eng_arduino_tut98_sch1.php
* Youtube Channel: http://www.youtube/c/electronoobs
// Arduino CC1101
// GND GND
// 3.3V VCC
// D10 CSN/SS **** Must be level shifted to 3.3V
// D11 SI/MOSI **** Must be level shifted to 3.3V
// D12 SO/MISO
// D13 SCK **** Must be level shifted to 3.3V
// D2 GD0
*/
#include <ELECHOUSE_CC1101.h> //Download it here: http://electronoobs.com/eng_arduino_ELECHOUSE_CC1101.php
int received_number = 0;
int LED = 3;
void setup()
{
pinMode(LED, OUTPUT);
Serial.begin(9600);
ELECHOUSE_cc1101.Init();
ELECHOUSE_cc1101.SetReceive();
}
byte RX_buffer[11]={0};
byte size,i,flag;
void loop()
{
if(ELECHOUSE_cc1101.CheckReceiveFlag())
{
size=ELECHOUSE_cc1101.ReceiveData(RX_buffer);
for(i=0;i<size;i++)
{
received_number = RX_buffer[i];
Serial.println(received_number);
}
analogWrite(LED,received_number);
ELECHOUSE_cc1101.SetReceive();
}
}
