Homemade Servo based gimbal project with 3D printed parts
Ok, before we start, I have to say that this is far from the best gimbal project. But I hope this tutorial will at least...
Homemade small ATtiny radio controller
We have seen a lot of radio controllers on this channel till now. We’ve seen one using the NRF24 module and making the...
Fully 3D Printed Bluetooth Headphones
I've used some commercial Sony Headphones that were wireless but based on FM, so there was a lot of hiss sound. So, I've...
Homemade Stream Deck with Arduino touchscreen and 3D printed case
This is by far the best way to control your livestreams, any professional streamer uses something like this. This is a s...
Electronoobs watch - Internal 8MHz clock
This is another very simple project and kind of geeky. I’ve made my own digital watch. If you think there is nothing t...
Homemade ESP32 NES Console Tutorial
Do you also want to make an old Nintendo console for less than 20 dollars? You could play thousands of old NES games and...
Full Homemade Sine Inverter EGS002 driver
Today we have an awesome project and also a bit dangerous. We are making a homemade full sine inverter of around 500W an...
Homemade Arduino LIDAR with 3D case and laser sensor
In this tutorial we will make a homemade lidar. Is not as good as commercial lidar sensor, but it would be good enough f...
Homemade Arduino drone Multiwii and wood frame
Wery easy, let's get to the point. Check the last version for more. Let's go step by step and build the ultra low cost d...
